+44 (0) 1527 516060

2021

Moulded Heavy Duty Harsh Environment Hinge

These heavy-duty harsh environment hinges have been designed for corrosion resistance. They are made from self-colour composite material with a trivalent coated steel pin with ‘o’ rings to stop dirt and debris from entering. None handed.

Read More

Moulded Shaped Weatherproof Paddle

These paddles are weatherproof, light weight and acoustically quiet. Flush fitting and no visible mounting points. Comes supplied with a ‘U’ fixing bracket for a quick installation. IP65 rated, short & long reach hook available. 30% glass filled nylon. UV stable.

Read More

Moulded Weatherproof Mini Claw Latch

A claw version of the mini weatherproof paddle. light weight and acoustically quiet. Flush fitting and no visible mounting points. Comes supplied with a ‘U’ fixing bracket for a quick installation. IP65 rated, short & long reach hook available. 30% glass filled nylon. UV stable.

Read More

Moulded Weatherproof Mini Hook Latch

A smaller alternative to the shaped weatherproof paddle. light weight and acoustically quiet. Flush fitting and no visible mounting points. Comes supplied with a ‘U’ fixing bracket for a quick installation. IP65 rated, short & long reach hook available. 30% glass filled nylon. UV stable.

Read More

Compression Latch 0-30mm Grip

Adjustable grip compression lever latch. Lockable, screw mounted latch with diecast flap, moulded body. Low profile once latched. Push button actuation. Grip range 0-30mm or 31-57mm.

Read More

Diecast Padlockable Compression Lock

A padlockable compression lock with 6mm of compression. Grip range 47-60mm. Accommodates standard 6.35, padlock loop. Variety of latch bars available. International patent protected.

Read More

Moulded Emergency Stop Assembly

Designed for ease of application. A neat and waterproof pan assembly. 30% glass filled nylon. High-quality xB5 & XB7 emergency stop buttons available. Multi language “emergency stop” label as standard. 2 and 4 wire cables feature available as well as a variety of lengths of cables upon request.

Read More

Moulded Inspection Hatch, 195mm Diameter

A neat and easy to fit polypropylene access cover. No fixing screws required. Comes fitted with a polyethylene foam seal. Also comes with a 300mm bright zinc plated chain for tethering. Hole cut out available upon request.

Read More

Moulded Inspection Hatch, 250mm Diameter

A neat and easy to fit polypropylene access cover. No fixing screws required. Comes fitted with a polyethylene foam seal. Also comes with a 300mm bright zinc plated chain for tethering. Hole cut out available upon request.

Read More

Diecast Hinge with Grease Nipple LH

Lift-off hinges providing improved appearance and greater security by use of concealed fixing studs, secured from inside. These are robust hinges intended for large enclosure doors, interior or exterior use.

Interchangable with our moulded & diecast lift-off models. Hinge is the same as the standard part but fitted with a grease nipple for easy maintenance.

Read More

Diecast Hinge with Grease Nipple RH

Lift-off hinges providing improved appearance and greater security by use of concealed fixing studs, secured from inside. These are robust hinges intended for large enclosure doors, interior or exterior use.

Interchangable with our moulded & diecast lift-off models. Hinge is the same as the standard part but fitted with a grease nipple for easy maintenance.

Read More

Black Foamed Steel Core Grab Handle

A moulded inline grab handle with textured finish. Moulded in expanded polyurethane foam. This grab handle has a soft resilient surface and no sharp edges, while the steel core provides strength and rigidity.

Read More

Yellow Foamed Steel Core Grab Handle

A moulded inline grab handle with textured finish. Moulded in expanded polyurethane foam. This grab handle has a soft resilient surface and no sharp edges, while the steel core provides strength and rigidity.

Read More

Moulded Recess Grab Handle

Lightweight recess grab handle. Completely flush-fitting. Fix through 2 countersunk holes at the rear of the pull. 2 x M6. Supplied with gasket

Read More

Moulded Light Duty Paddle, Slam Bolt

A lightweight paddle latch range with various locating options. 30% glass filled nylon construction. UV stable. Short & long hook options available & slam. Light to medium use. Tested to 25,000 cycles. MP00502 gasket optional extra.

Read More

Moulded Light Duty Paddle, Hook Latch

A lightweight paddle latch range with various locating options. 30% glass filled nylon construction. UV stable. Short & long hook options available & slam. Light to medium use. Tested to 25,000 cycles. MP00502 gasket optional extra.

Read More

Moulded Light Duty Paddle, Extended Hook Latch

A lightweight paddle latch range with various locating options. 30% glass filled nylon construction. UV stable. Short & long hook options available & slam. Light to medium use. Tested to 25,000 cycles. MP00502 gasket optional extra.

Read More

‘Oval’ Paddles Hook-Latch Models

Our ‘Oval’ paddles have superb appearance and are quick and easy to install. Made in tough, self-colour moulded materials for corrosion resistance, they are flush-fitting and have no visible mounting points.

The ‘hook-latch’ design incorporates a spring-loaded stainless steel ‘hook’ that projects vertically from the back of the paddle case rather than the conventional slam-bolt. This gives a much smoother action – doors close easily, and do not ‘bounce back’. The loop striker (also in stainless steel) ensures positive engagement which resists vibration.

Read More

Moulded Foot Step

A lightweight moulded foot step with an increased grip level over aluminium versions. Black as standard. 30% glass filled nylon construction with a neoprene seal.

Read More

‘Oval’ Paddles Slam-Bolt Models

Our ‘Oval’ paddles have superb appearance and are quick and easy to install. Made in tough, self-colour moulded materials for corrosion resistance, they are flush-fitting and have no visible mounting points.

These are slam-action models using a machine-cut solid bolt in mild steel. They are used in applications where the door aperture must be completely unobstructed, and the bolt engages against the doorframe, or with a suitable striker.

Read More

Concealed Hinge

Concealed hinges provide the ultimate architectural look, hidden from view to allow for continuous clean lines around a door frame. This allows doors and frames to sit flush even when the hinge is fully concealed on the inside.

Read More

Heavy-Duty Locking Filler Cap & Necks

A sturdy, diecast cap designed for construction plant and heavy trucks, with a ‘snap-in’ barrel, allowing the cap to be matched with a full vehicle lock-set. A sliding diecast plate protects the key-aperture from water and debris.

Recommended specification is fully sealed, but caps can be vented for some applications. This model suits “internally-flanged” neck-ends, (illustrated) which can be brazed onto a plain filler pipe, generally at 76 mm (3 inch) diameter.

Read More

‘Chunky’ Commercial Filler Caps & Necks

This model has been used by every British truck manufacturer as well as for ‘static’ applications such as power generator sets. Recommended specification is fully sealed but the ‘Waso’ venting system will suit some applications. Caps fit “internally-flanged” neck-ends (illustrated), which can be brazed onto a plain filler pipe, generally at 76 mm (3-inch) diameter.

Read More

Foamed Steel-Cored Grab Rail – 300mm

Moulded in expanded polyurethane foam, this handle has a soft, resilient surface and no sharp edges, while the steel core provides strength and rigidity. This modern design replaces traditional steel stanchion rails, and ensures safety and comfort when used as a grab, or entryassist rail.

Read More

Foamed Steel-Cored Grab Rail – 475mm

This model meets the requirement for an entry-assist rail with extended length of grip for use with entry steps on buses and coaches, or for high cabs and trucks. It is made in solid 10mm steel rod to achieve maximum strength without ‘flexing’.

Read More

Foamed Steel-Cored ‘Hand-Hold’ – 150mm

This unique design complements our range of larger “foamed” grab rails, but is suited to more restricted spaces. It makes an ideal alternative to traditional “6- inch” pulls, with textured, resilient surface, great strength, and a shape that lends itself to fixing in several modes as illustrated.

Read More

Moulded Steel-Cored Handles

Moulded in resilient elastomer around steel cores, these handles have been designed for those applications where great strength is required, but still offering good appearance and
‘user-friendly’ characteristics.

Read More

Moulded ‘Budget’ Latch

An ingenious design that replicates the function of our ‘Universal’ budget latch, but which takes full advantage of the properties of moulded materials. It is tough, lightweight, non-magnetic, self-lubricating, and totally corrosion-resistant. A special version is supplied with 8mm steel shaft, which can be fitted to either face (9/01957). This is normally used with moulded handle, 5/01664.

Read More

‘Universal’ Budget Latch & Fittings

This simple ‘deadbolt’ latch has become an industry standard. Basic model is mild steel construction, with options in stainless steel or with moulded bolt. Two sizes of operating keys are available and diecast escutcheon covers can be fitted to conceal panel aperture.

Read More

‘Handed’ Budget Latches

Cleverly designed so that top and bottom plates are mechanically interleaved for maximum strength, these latches have an exterior spring and are ‘handed’ as shown. Fixing holes on standard models are countersunk after plating but versions are available with plain 5mm holes.

Read More

Security Budget Latches

With same dimensions as the ‘Universal’ model, this design has a forged brass bolt to provide a blind, dust-proof centre which requires a special security key to operate. Latch is zinc plated.

Read More

Large Budget Latches

With exceptionally strong construction, this model suits heavy applications and where a stronger, more substantial bolt is required to resist abuse. Uses include large storage containers, bus engine and luggage compartments.

Read More

Key-Operated Compression Locks

A lock design, intended for use with gasketed doors, which provides 6mm of compression to make a firm seal.

It is water-resistant, fully adjustable, and is mounted within an industry-standard 4-sided panel aperture. Straight latch asstandard, with a full range of other bars available.

Read More

Tool-Operated Compression Locks

A model intended for use with heavy gaskets and seals, so that when locked the latching bar is drawn up by 6mm and is held firmly in place. Water sealed, fully adjustable, and mounting to industry-standard 4-sided panel aperture. Smart diecast key with priovision for customer’s identity logo.

Read More

Compartment Locks (19mm) – ‘De-Luxe’ Specification

These are simple, inexpensive locks used on all types of steel and metal enclosures, cabinets and panels. The diecast housing fits a ‘double-D’ piercing and is retained by a large hexagonal nut.

This is the original ‘Wilmot Breeden’ specification with several special features as noted. It is particularly suited for applications where vibration may be a problem.

Read More

‘Short Body’ Locks (13mm)

Use these locks where depth is restricted, since body length is 7mm less than standard. It can be further reduced with optional moulded spacer under head.

Read More

Compartment Locks (19mm) with 90° Key-withdrawal

These are special models with 90° rotation, but in which keys can be withdrawn in both locked and unlocked positions. All details are as the 19mm ‘de-luxe’ specification, with spiked locating plate provided, but with straight latch bar as standard.

Read More

‘Long Body’ Locks (30mm) With 90° Key Withdrawal

With extended body depth to 30 mm, these locks are ideal for thick panels (chipboard, composites), and keys can be withdrawn in locked and unlocked positions with both 90° and 180° models. Locks have ‘shuttered’ keyway for weather protection, with spiked locating plate and straight latch bar.

Read More

‘Weathershield’ Locks – for Exterior Use

A special model, with pivoted diecast cover which protects keyway against dust and water. Normally 90° operation with key withdrawing in both positions. Chrome, with ‘FS’ or ‘FT’ keys and full choice of latch bars.

Read More

‘Tri Locks’ & Square-Drive Locks (19mm)

Attractive locks for low-cost security, using housings and fittings interchangeable with keyoperated models.

Two styles are available, with either 8 mm-square or triangular plug, with keys to match. Both are suitable for exterior use and can be water-sealed to IP55 if required.

Read More

‘Fixed-Key’ Panel Fastener

A useful ‘quarter-turn’ fastener with a diecast turn-key permanently retained in the housing, making it useful for interior cabinets, inspection panels,etc. Black key within chrome housing.

Read More

Tool-Operated Compartment Locks

Two styles of ‘quarter-turn’ fasteners, using standard housings and fittings so they are interchangeable with key-operated models. Both are available in 19 mm & 30 mm lengths.

The ‘recess-square’ design allows relatively high turning force to be applied (using the 8 mm T-key). The ‘coin-op’ model is used as a convenient catch, opened with almost any coin or screwdriver blade.

Read More

Low-Profile Compartment Locks

A new model, designed with a “shuttered” cylinder for weather protection but with a wider, lower head style for enhanced appearance. Larger panel piercing to match our ‘easy-fix’ handles, with nut-fixing for latch bar. A neoprene gasket and diecast spacer are provided. Finish is bright chromium-plated.

Read More

Latch Bar Options For Compartment Locks

These are some of the more commonly-used latch bars for our compartment lock range. All are made in mild steel, 15 mm x 2.2 mm, and zinc-plated, with an 8-sided hole to accept 8 mm-square drive (unless otherwise noted). All are reversible.

Standard lock models are normally fitted with the ‘cranked’ bar (7/01906) or the ‘straight’ bar, (7/03640). However, any of these options can be provided on request,and special bars made to order where volumes are appropriate.

A range of 3 mm heavy-duty bars with raised cam-form is also available and is shown separately.

Read More

‘Turnbutton’ Remote Action Lock Unit

A very low profile design with spring return, used to operate a latch or mechanism which is mounted remote from the lock itself. It has been widely used as a vehicle boot (trunk) and tailgate lock.

Read More

Cam-Form & Multi-Point Latch Bars

These bars are in 3 mm-thick mild steel, zinc-plated with 8 mmsquare hole. Cam-form types have a 4 mm ‘leading edge’ for good engagement. They can be used with most of our compartment locks, ‘Compact’ and ‘Turnbutton’ models, and also with handles having 8 mm square shaft, as illustrated below.

Read More

This is a Test Article 3

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin a tempus turpis, non maximus mi. Integer vel porttitor nibh. Praesent tincidunt ante non ultricies porttitor.

Read More

This is a Test Article 2

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin a tempus turpis, non maximus mi. Integer vel porttitor nibh. Praesent tincidunt ante non ultricies porttitor.

Read More

This is a Test Article

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Proin a tempus turpis, non maximus mi. Integer vel porttitor nibh. Praesent tincidunt ante non ultricies porttitor.

Read More

Concealed-Fix Moulded Grab Handle

Clean, sharp lines characterise this new addition to our range, intended for surface- mount applications where fixing from inside is desired. The handle contains threaded brass inserts, moulded-in during manufacture, and has a relatively high grip for a gloved hand.

Read More

Screw-Type Non-Locking Filler Caps

Two models of moulded cap with internal screw-thread, designed for 60 mm-diameter necks with matching thread.

The smaller cap has castellated ridges for good grip, and ‘diesel’ embossed on the top surface. It can be supplied fully sealed, or valved and vented. Normal finish is semi-gloss black, with colours on request. A chain is optional. The larger cap will fit the same neck but has a ratchet-ring to prevent overtightening, and a central finger-bar. It is fully sealed, with black fine-textured finish.

Read More

‘Panic Button’ Emergency – Stop-Switch & Recess Pan

A neat self-contained and cost-effective unit which allows an engine or power-supply to be shut-down immediately. It comprises a red ‘panic button’ and contact block, which is easily assembled into a stainless steel recessed pan. Applications include power generators, compressors and public service vehicles where safety considerations apply.

Read More

Rotary Ventilator with Inside Grille & Adaptor

This rotary ventilator is better-looking and up to 25% more efficient in removing stale air from within a vehicle. We have now created an inside adaptor-ring, allowing neat and easy installation of an inside grille. Concealing all fixing screws and making the ventilator entirely suitable for mini-buses and other ‘prestige’ applications.

Read More

Tie-Down Ring & Shroud

This useful steel tie-down has a moulded shroud for plant-on fixing to wall or floor. A high-tensile bolt should be used, fitting through steel support plate. There is a rubber plug to ‘cushion’ ring and prevent rattle. Bright zinc-plated.

Read More

Tie-Down Loop

A plant-on, fixed loop able to accept very high loads. Welded assembly, hardened and bright zinc-plated with 7mm fixing holes, countersunk to 13mm.

Read More

‘Economy’ Grab Handle

A smart, inexpensive handle with ‘plant-on’ fixing. It is made in black polypropylene with textured finish, with longitudinal ribbing to lighten weight and increase strength.

Read More

Lift-Off Moulded Hinges

These hinges have been designed for corrosion resistance, and to prevent stiffness and uneven action, common problems on construction sites and other ‘dirty’ environments. They are made from self-colour composite material, with a stainless pin ‘buried’ within the hinge and fitted with an ‘O’-ring to stop dirt and debris from entering. Left-hand & right-hand versions.

Read More

Lift-Off Steel Hinges

These steel hinges carry relatively high loads and are suitable for larger enclosures such as compressors, generators and electrical cabinets. They are available in either mild steel or stainless steel, with end caps and stainless pin and bearing washer for smooth operation and corrosion resistance. Left-hand and right-hand available.

Interchangable with our moulded & diecast lift-off models

Read More

Lift-Off Concealed-Fix Steel Hinges

In this design fixing holes are omitted and are replaced with welded-on M8 threaded studs. This provides an attractive, smooth, and tamper-proof visible surface, in either mirror-polished stainless steel or mild steel, black powder-coated. Left-hand and right-hand available.

Read More

Lift-Off Concealed-Fix Diecast Hinges

Lift-off hinges providing improved appearance and greater security by use of concealed fixing studs, secured from inside. These are robust hinges intended for large enclosure doors, interior or exterior use. Left-hand and right-hand.

Interchangable with our moulded & diecast lift-off models.

Read More

Lift-Off Moulded Hinges – Smaller Size

Developed as an alternative to our popular diecast ‘torpedo’ hinges, this smart design brings all the advantages of modern materials, yet is more economical and fully interchangeable with the diecast models. Left-hand and right-hand available.

Interchangable with our diecast ‘torpedo’ hinges.

Read More

Diecast Grab-Rail – 250mm

This model was designed with clean, modern lines in reaction to traditional ‘commode’ style diecast grab handles with thin sections and curved shapes. It is ideal for use as an entry-assist on rear and side doors of trucks and vans, for compressor and engine covers, and on containerised gen-sets.

Read More

Concealed-Fix Diecast Grab Handle

An attractive handle with ‘streamlined’ design to avoid sharp corners, with fixing from underneath into two tapped holes. Available in hand polished chromium-plated finish, or black powder-coated.

Read More

Rod Type Grab Rails

Widely used for electrical cabinets and equipment drawers, these handles are rolled from 9 mm stainless steel bar, bright polished.

Ends are drilled and tapped M5, and two screws are supplied for mounting from beneath.

Read More

‘Lowline’ Grab Handle

A traditional design with shaped ‘grip’ area, and with low, flat styling for minimal projection. Hand polished and chromium plated to very high standard.

Read More

Wall-Mounted Ashtray

Attractive, moulded ashtray for recess fitting into simple cut-out, secured by screw and steel ‘U’-bracket (provided). Textured finish in black ABS, suits side-panel, seat-backs, etc. Meets EC 95/28/C for combustibility. Easily separated for cleaning.

Read More

‘Plant-In’ Ashtray

A neat metal ashtray which fits into a horizontal recess (armrest, transmission tunnel, etc), retained by spring clip but can be pulled-out for cleaning. Chromium-plated bowl and snuffer, black or chrome lid.

Read More

Double-Sided Flush-Fit Grab Handles

This design is available in both diecast and moulded construction. It is completely flush-fitting and easy to fix into panel aperture. The shaped edges allow easy action with roller shutters and sliding doors. Use the diecast version when handle is used to lift heavy equipment.

Read More

Flush-Fit Steel Grab Handle

A fully-recessed grab handle, large enough to receive a gloved hand. The unit is completely corrosion-resistant and shaped to allow run-off of water (spray, etc.). It is suitable for large commercial vehicles and trailers, etc.

Read More

Semi-Flush Steel Handle

This model uses the same recess pan as our ‘T’ handle sets, 9/00186 etc, with a 10mm steel ‘strap’ welded across the recess to provide a strong, neat, semi-flush handle, Black finish, gasket supplied separately

Read More

Lift-up Handles – Recess Mounting

Very useful, plant-on ‘chest’ handle, with attached backplate and concealed spring which returns to ‘rest’ position. Stainless steel throughout, with ‘grip’ in resilient rubber. Also available for surface mounting (without recess plate) to special order.

Read More

Fold-Down Drink-Holder

Here is a useful add-on feature for passenger comfort on coaches, mini-buses and in off-road cabs. When closed, it fits neatly against a panel or seat-back, and opens to hold a cup, bottle or can securely in a moving vehicle.

Read More

Lift-Off ‘Torpedo’ Hinges

Our popular ‘torpedo’ hinges are widely used for electrical cabinets and enclosures, allowing doors to be quickly mounted or removed from frames. Chromium-plated finish and 10 mm stainless steel pin gives good resistance to normal environmental conditions. Left-hand and right-hand.

Read More

4-Hole ‘Torpedo’ Hinges

These 4-hole versions are recommended for heavier doorswhere the extended leaf enables weight to be better distributed. Left-hand and right-hand available.

Read More

Diecast Window/Hatch – ‘Flat’ Hinge

A low-profile design with concealed fixing on the leaf into two tapped bosses. These, with securing plate and rubber gaskets, allow a panel to be held securely without damage or fracture. Ideal for top-hinged windows and hatches.

Read More

‘Buckle’ Inside Release Handles

A neat, automotive design which is very easy to fix. There is no locking feature, so it is used on doors where inside locking is achieved by sill-button or other means. Two styles of connector as shown, non-handed.

Read More

Raised-Profile Hinges – in Stainless Steel

In this design the hinge pin is raised above the surface to allow clear opening of doors. The hinge leaf is shaped accordingly, giving additional strength and good appearance. ‘Handed’ only by direction of fitted pin, and available in two sizes as shown.

Read More

Inside Release Handles (Screw-Fixing to 9.5mm Square shaft)

‘Webbed’ Style

Strongly-styled handle with ‘webbed’ sidewall, in black ABS with chrome-plated diecast base-plate. Screw-fixed into 9.5mm (3/8”) square core, in-line with axis.
(was BL ‘mini’, etc.)

‘Traditional’ Model

‘Traditional’ model with high grip and integral skirt, diecast and chromium plated. Screw-fixed into 9.5mm (3/8”) square core, in-line with axis.

Read More

Inside Release Handles (Screw-Fixing to 8mm Square Shaft)

Moulded Handle

A small, tough, useful handle made in wear-resistant Acetal, with fine-sparked finish. Normal colour is black, red also available. 8mm square core, in-line with axis.

‘Spade-end’ Handle

Diecast handle, useful for restricted spaces. Available in chrome only. 8mm square core, in-line with axis.

Read More

Fixed-Pin Vertical Leaf Hinges

An attractive and useful hinge for large enclosures where door frame width is restricited, but where relatively heavy loading is anticipated. This is a fixed-pin hinge and it is non-handed.

Read More

Diecast Block Hinges for Flush Doors

These ‘block’ hinges are a simple way to hang flush doors on metal cabinets, electrical enclosures, etc, allowing “lift-off” capability from a narrow door surround.

‘Handed’, left and right, these hinges provide great flexibility in a variety of configurations. See schemes below. Use one hinge of each hand to create a non-lift-off, permanently retained door.

Read More

Diecast Block Hinges for Offset Doors

‘Block’ hinges are a neat, convenient method for hanging externally-fixed doors on metal cabinets, electrical enclosures, etc. Non-handed, the upper part simply sits onto a fixed steel pin (oppose hinges for when door is permanently fitted).

Read More

Stainless Block Hinges for Offset Doors

These machined block hinges suit high-quality cabinets and enclosures, where stainless steel fittings are required to prevent problems with corrosion, staining and binding-up, which can occur in damp or chemically-active environments.

Produced in three standard sizes, the hinges have a ground satin finish and are lubricated with light oil for smooth action. They are exact alternatives to our diecast ‘block’ hinges.

Read More

Get in touch today!