The ‘turnbutton’ lock is fitted with a direct-action operating bar, making it an extremely low-profile handle for securing doors or for driving rod mechanisms.
Double-sided ‘FT’ Keys are standard9/01861
|9/01861||Turnbutton, chrome, 90° LH|
|9/01861/01||As above, FT111 keys|
|A||Face width||45 mm|
|B||Body depth||37 mm|
|C||Face height||14 mm|
|D||Depth to latch||30 mm|
|E||Height of latch||48 mm|
|Latch bar can be fitted at 90° intervals|
This larger aperture also
suits our ‘easy-fix’ range
of ‘L’ & ‘T’ handles.
|H||Piercing across flats||22 mm|
|J||Piercing, diameter||24 mm|
Straight bar is fitted as standard
5/00097 Cranked ‘down’ 9.5mm 5/00275 ‘straight’ 5/00276 Cranked ‘up’ 9.5mm
Straight latch bar is fitted as standard, with two options cranked 9.5 mm ‘up’ or ‘down’. Lock will accept all other bars with 8 mm piercing, including 2/3-point options.
90° LH MOVEMENT
Handles operate LH (clockwise) but lock in horizontal position only. Key does not withdraw in ‘open’ position.
|Rotation is 90° LH. Key operate only when handle is horizontal,
but key withdraws in both locked positions.
|Insert from front into pierced aperture and fix with large hexagon nut.
Neoprene gasket and stainless spring washer are provided.
|‘FT’ keys as standard with ‘shuttered’ keyway. Optionally ‘FS’
or ‘DLP’ key types.
|bright chromium-plated or black powder-coated.|
|– Cranked latch bars
– 2/3-point bars and rods
– Special key numbers or sets.
|Download the PDF of this product…|