The ‘M70’ is a unique lock, designed primarily for add-on fitment to vans and commercial vehicles.
It provides a high-strength deadlock and good level of key security, independent of factory-fitted lock/latch systems.
9/08501, LH M70 lock fully-assembled in position when fitted
into door. Note large-size key head with corrosion-resisitant key blade.
|9/08500||‘M70’ Deadlock, RH|
|9/08501||‘M70’ Deadlock, LH|
|9/08502||‘M70’ Deadlock, pair|
|Note: Strikers, gaskets & pegs are included
with locks, with two keys as illustrated.
Door ‘private’ locks
To special order the M70 stainless steel cylinder can be incorporated into door locks with ‘lost motion’
to replace factory fitted-items. (see page A3)
‘Handing’ of M70 locks
The M70 is handed only by position of actuating cam on rear of lock cylinder, which can which can be quickly reversed during fitment.
|H||Hole sizes||c/s 8mm dia. 4mm|
|K||Bolt width (‘throw’)||20mm|
|M||Bolt thickness (nosed)||6mm|
– Escutcheon outside diameter is 37mm
– integral diecast mounting flange with 5mm wall-thickness and foam gasket.
– Threaded cylinder (with neoprene gasket) allows up to 5mm adjustment in height.
– Hardened socket-screw, M4 x 14 cap head.
Striker plate not shown.