9/00439 2-way full set (using stainless centre case, 9/00438, standard end latches and links).
‘Blind mounting’ models have four studs (M6x15mm) welded on inside flanges. This option is available on all paddles. Consult engineering drawing for position of studs (not same as holes).
Single-sided ‘FS’ keys are standard
Ordering Code
Stainless models with pierced rim (& gasket) | |
9/00438 | 2-way paddle centre, locking |
9/00438/01 | 2-way paddle centre, FS 880 |
9/00439 | 2-way paddle system, locking |
9/00439/01 | 2-way paddle system, FS 880 |
9/00417 | 2-way paddle centre, non-locking |
9/00437 | 2-way paddle system, non-locking |
Mild Steel models with plain rim, (& gasket) | |
9/00409 | 2-way paddle centre, locking |
9/00409/01 | 2-way paddle centre, FS 880 |
9/00429 | 2-way paddle system, locking |
9/00429/01 | 2-way paddle system, FS 880 |
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
E | ‘Travel’ of link point | 15 mm |
F | Depth of link point | 37 mm |
G | Location of link point | 47 mm |
Note : ‘F’ can be reduced to 30mm by mounting pillars on inside face of levers.
Standard linkage bar 3/12497 (915 mm) used for 2-way slam system. Piercing allows ‘quickfit’ attachment of latches and free movement when centre is locked.
- All-stainless mechanism, heavy duty slide and locking cam, mirror finish on case/flap and no sharp edges. Moulded gasket supplied.
- Latches slam against sides of door frame or strikers, released by lifting paddle flap.
- Locking with key blocks flap and 2-way mechanism, but end latches are still free to operate using ‘free movement’ aperture in link bar (as illustrated).
- Stainless models have pierced rim as shown or internal welded studs, with moulded gasket. Mild steel models normally have plain rim (for weld-on mounting). Link bars held by split pin on pillar rivets.
- ‘FS’ as standard, optionally ‘FT’, ‘92’, or ‘DLP’ key types. Non-locking models.
- Polished stainless steel, or mild steel, bright zinc-plated. Optionally, black powder-coated finish.
- With stainless models, all steel components made in Grade 304. With mild steel models, case and flap made in CR4, zinc-plated, with diecast cylinder and locking cam.