+44 (0) 1527 516060


Diecast Cams & Heavy-Duty Latch Bars

Our diecast cams provide the simplest way of securing an enclosure door. They fit onto a plain, 8 mm-square shaft, and are clamped into position with the integral socket screw. A version is available with hole threaded M8, to suit corresponding round shaft.

The range of heavy steel cams (below) is normally fitted to our ‘drop-T’ series, but they can be used with any 8 mm-square shaft, normally threaded M10 with securing nuts to allow for adjustment and retention. Finish is bright zinc-plated.
Ordering Code
1/27296 Small cam, 8 mm square hole
9/00837 Large cam, 8 mm square hole
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A Length (small cam) 32 mm
A1 Length (large cam) 63 mm
B Width 40 mm
C Location 11 mm
D Diameter 19 mm
E Height 13 mm
F Cam-form 4 mm

All cams are fitted with hexagon-head grubscrew, adjusted by 3/32” Allen key (threaded10/32 UNF x 3/8”)

Heavy-duty Latch Bars

Heavy-duty latch bars, made in rolled-edge mild steel, 30 mm width x 5 mm deep, with 3 mm ‘V’ raise for cam-action.

Get in touch today!