9/01279 Non-Locking Handle
9/01280 Locking Handle
Mounting holes at 44mm centres are totally hidden when handle is locked
Ordering Code
9/01280 | ‘Titan’ (160 mm) locking, black |
9/01280/01 | As above, FT111 |
9/01279 | ‘Titan’ (160 mm), non-locking,black |
Handles operate through 180° as standard (non-handed). Rotation can be limited to 90°LH (clockwise) or 90° RH (anticlockwise), or to special order, to 180° horizontal movement as shown. Handles will lock in each 90°position.
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Handle length | 160 mm |
B | Mounting width | 37 mm |
C | Face height | 41 mm |
D | Depth of handle boss | 18 mm |
E | Shaft length | 130 mm |
F | Clearance | 28 mm |
G | Hole centres | 44 mm |
H | Hole sizes (open) | dia. 5.5 mm c/s 10 mm. |
- Large size, wide section for good grip, convenience of external mounting but with screws fully concealed when locked, double-sided keys as standard.
- 180° as standard, rotation can be limited to 90°, LH/RH, or to the special ‘180° horizontal’ option. Handles lock at each 90° position.
- Fix through countersunk holes at 44mm centres, which are completely hidden when handle is locked. Neoprene gasket supplied.
- ‘FT’ double-sided keys as standard with ‘shuttered’ keyway. Alternatively ‘FS’, or ‘DLP’ key types.
- Black as standard, other finishes to special order only.
-
- Shaft lengths
- Threaded shafts (M10)
- Special key numbers/sets
- 90° LH/RH rotation