9/02142 Right side latch showing operating levers
(outside view)
Ordering Code
9/02142 | Disc latch, RH |
9/02143 | Disc latch, LH |
3/21330 | Loop-striker |
9/02142 Right-side illustrated
Outside latching (up to release)
Outside locking lever (down to lock)
Inside locking lever (push to lock)
Inside latching lever (pull to release)
Illustration to show operation of actuation levers (right-hand shown)
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Max width | 66 mm |
B | Body height | 94 mm |
C | Body depth | 21 mm |
E | ‘Throat’ height | 18 mm |
H | Holes | c/s 13 mm ø 7 mm |
J | Striker width | 40 mm |
K | Plate height | 78 mm |
L | Loop depth | 30 mm |
M | Hole centres | 51 mm |
O | Hole sizes | c/s 13 mm ø 7 mm |
For other dimensions consult engineering drawing
- Slam-action against loop-striker. Both ‘hands’ available as illustrated.
- Striker loop engages with a slotted steel disc with 2-stage action, and is released by (outside) push-plate or (inside) latching lever. The separate locking levers block operation of latch release.
- Fully plant-on to door edge, fixing through body of latch with cut-outs for operating levers.
- Moulded body is white, face-plate and striker are bright zinc-plated, other components zinc finish.
- Body is acetal co-polymer, face-plate and operating components are steel. Striker plate is hot staked, brazed and hardened.
- Use with WBH ‘flap handle’ designs and inside release units.
- Use with WBH ‘flap handle’ designs and inside release units.
-
Anti-burst properties
When rig-tested these latches can achieve values in excess of 8.9KN* transverse load in fully-latched condition. However vehicle builders are responsible for evaluating performance in their own particular application and for ensuring that appropriate legislation is satisfied. SAE & ECE II specifications.