9/01383 Catch in ‘open’ position
Catch in ‘closed’ position
9/01384 Double loop striker
Ordering Code
9/01383 | Hold-down catch |
9/01384 | Double loop striker |
Striker is parallel with catch
Striker is at 90° to catch
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Case length | 110 mm |
B | Case height | 56 mm |
C | Case width | 58 mm |
D | Projection | 21 mm |
E | ‘Claw’ Height | 21 mm |
F | Hole centres | 44 mm |
G | Hole centres | 55 mm |
H | Hole sizes | 16.5 x 6 mm |
J | Height of loop | 60 mm |
K | Width of loop | 50 mm |
L | Hole centres | 70 mm |
M | Projection | 45 mm |
N | Plate width | 30 mm |
O | Hole size | 8 mm |
- The catch is mounted on cover or base, and simply slams against a striker. Release is by direct pull away from striker, usually using a grab handle. Pull -out force is 20kg (55lbs).
- Slam-action causes moulded ‘claw’ to rotate through 60˚, bringing the powerful spring over-centre to trap and hold down the striker loop.
- Fixing through four elongated holes in base-plate.
- Steel parts are zinc-plated. ‘Claw’ is glass-filled nylon in black.