9/02094 locking unit c/w striker plate
9/02096 non-locking unit c/w striker plate
Ordering Code
| 9/02094 | Locking unit, with striker plate, black |
| 9/02096 | Non-locking unit, with striker plate, black |
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| A | Total length | 212 mm |
| B | Length to striker pin | 120 mm |
| C | Max width (base) | 96 mm |
| D | Length (base) | 30 mm |
| E | Max width (strikers) | 93 mm |
| F | Hole centres (strikers) | 58 mm |
| G | Hole centres (base) | 75 mm |
| H | Hole sizes (base) | 8.5 dia |
| I | Hole sizes (striker) | 8.5 x 20 mm |
| J | Length (striker) | 72 mm |
| K | Max height (not shwon) | 42 mm |
- Base-plate is mounted on fixed member, striker plate is mounted on mating panel. The catch body is brought down so that operating 'claw' engages with striker pin, and the pivoted lever-handle is then pressed down to achieve over-centre action, forcing panels tightly together.
- Action of lever-handle extends spring-loaded plunger, holding catch tightly in position and preventing ‘rattle'. On locking versions, lock cylinder secures handle against striker plate.
- Completely plant-on fixing, by bolts or rivets through mounting holes (slotted for adjustment on striker plate).
- 'FT' or optionally 'FS' key types. Non-locking version available.
- Black powder-coated as standard. Optionally, clear zinc plated.
- Special key types, key numbers, and sets.
