(9/00424) - Right-hand in unlatched position
9/00425 Striker
Ordering Code
| 9/00423 | Rotary latch, LH |
| 9/00424 | Rotary latch, RH |
| 9/00425 | Striker pin, (not handed) |
Application of series 400 latches - see ‘Flap Handles’
Striker pin head 8mm hex x 4mm deep LOCK Thread form 14 UNC Class 2A
Striker pin head 8mm hex x 4mm deep LOCK Thread form 14 UNC Class 2A
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| A | Case length | 92 mm |
| B | Case width | 40 mm |
| C | Case depth | 20 mm |
| D | Location | 21 mm |
| E | Pivot to hole | 21 mm |
| F | Location | 59 mm |
| G | Acuator hole (dia) | 6.5 mm |
| H | Mounting hole (dia) | 8.0 mm |
| J | Pin head diameter | 19 mm |
| K | Surface projection | 26 mm |
| L | Total pin length | 44 mm |
| M | Washer diameter | 30 mm |
| N | Striker pin diameter | 14 mm |
- Slam-action against striker pin. Both ‘hands’ available as illustrated.
- Claw engages pin with 2-stage action, and is released by pull as shown on 2-lobe actuator arm.
- Plant-on to edge of door, fixing through body of latch with cut-out for actuator arm.
- Clear zinc-plated throughout.
- Alternative actuator arms to special order.
- Use with ‘remote action’ handles, turnbuttons, wire and rod linkages, etc.
-
Anti-burst properties
When rig-tested these latches can achieve values in excess of 8.9 KN* transverse load in fully-latched condition. However vehicle builders are responsible for evaluating performance in their own particular application and for ensuring that appropriate legislation is satisfied. SAE & ECE II Specification
