9/01563
Latch Tongue Options - The standard multi-point latch tongue can be cranked to give a number of options, providing engagement depths between 17-37mm in 5mm increments. However this is not adjustable and cannot be varied on site. (Use the suffix letters shown to specify the latch bar required.)
Ordering Code
| 9/01563 | 3-way Drop-T set, stainless, non locking, c/w rods |
| 9/01564 | 3-way Drop-T set, mild steel, non locking, c/w rods |
| 9/01569 | Centre only, 3-way, stainless, non locking |
‘Cranked down’ 3-way tongue can be shaped to increase ‘I’ dimensions
Suffix A I=32mm
Suffix B I=37mm
‘Cranked down’ ‘Cranked up’ 3-way tongue can be shaped to reduce ‘I’ dimensions
Suffix A I=22mm
Suffix B I=17mm
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| A | Width of pan | 120 mm |
| B | Length of pan | 100 mm |
| C | Hole centres | 69 mm |
| D | Hole centres | 90 mm |
| E | Max depth | 45 mm |
| F | Rod fixing centre | 52 mm |
| G | Length of latch Cam depth |
70 mm 3 mm |
| H | Hole sizes (dia) | 7.5 mm |
| I | Engagement | 27 mm |
| J | Visible length | 30 mm |
| K | Rod length | 1145 x 9.5 mm (dia) |
Rods withdraw by 25mm in line of travel, as latch disc rotates through 90°.
Illustration shows 3-way centre with tongue cranked down to 37mm.
Also visible are pillar-rivets for attachment of rods, and screws to set ‘L’ or ‘R’ movement
- Polished diecast ‘hub’, and neoprene seal under stainless ‘cup’ washer for good appearance, corrosion-resistance and weatherproofing.
- Lift handle to turn, releasing latch tongue and withdrawing rods. Reverse to close-tongue has 5mm cam-form for easy engagement.
- Latch travels 90° from centre against ‘stops’, which can be adjusted to allow either LH or RH operation.
- Polished stainless steel with chrome handle and hub, or mild steel, zinc-plated. Optionally, black powder-coated finish.
