9/01501 Single-point model showing standard latch bar and adjustment nuts
Ordering Code
Stainless Steel Models | |
9/01501 | LH, locking (Mixed differ) |
9/01502 | RH, locking (Mixed differ) |
9/01503 | LH, standard-key FS880 |
9/01504 | RH, standard-key FS880 |
Mild Steel models | |
9/01511 | LH, locking (Mixed differ) |
9/01512 | RH, locking (Mixed differ) |
9/01513 | LH, standard-key FS880 |
9/01514 | RH, standard-key FS880 |
Handle turns anticlockwise to release the latch tongue
Handle turns clockwise to release the latch tongue
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Width of pan | 120 mm |
B | Length of pan | 125 mm |
C | Hole centres | 69 mm |
D | Hole centres | 90 mm |
E | Max. depth | 68 mm |
F | Height of handle | 30 mm |
G | Length of latch | 70 mm |
H | Hole Size (dia) | 7.5 mm |
I | Engagement(normally set at 51 mm) | 43-55 mm |
J | Widthcam travel 3 mm depth | 30 x 5 mm deep |
K | Projection | 30 mm |
L | Location | 34 mm |
‘I’ | dimension can be varied using different latchbars. See options. |
‘I‘ dimension can be varied using different latch bars. See options.
Gasket ref: MP00450 (locking)
- Stainless models are bright-polished for good appearance, neoprene seal under stainless ‘cup’ washer for weatherproofing, rubber gasket supplied as standard.
- Lift handle to turn latch tongue, which is adjustable through 12mm vertically. Locks only in centre (rest) position.
- Latch travels 90 degrees from centre against ‘stops’ and is ‘handed’ LH or RH as specified, non-reversible.
- Four holes in rim at 7.5mm diameter for bolts or rivets. Latch bar is adjusted by 2 x M10 nuts.
- ‘FS’ keys with shuttered keyway as standard. Optionally, ‘FT’ double-sided keys. Non-locking versions also available.
- Polished stainless steel with chrome handle & hub, or carbon steel, zinc-plated. Optionally, black powder-coated. All internal parts are zinc plated for corrosion resistance.
- ‘T’-pan in grade 304 stainless steel, or carbon steel to CR4. Handle, hub and support bracket are zinc diecast.
- Alternative latch bars. Weathershield options. ‘Blind mounting’.