9/00448 (locking)
9/00406 Striker (stainless)
Single-sided ‘FS’ keys are standard
Ordering Code
Mild steel models, with plain rim & gasket | |
9/00440 | Hook-latch paddle, locking |
9/00440B | As above, black |
9/00440/01 | As 9/00440,FS880 standard keys |
9/00440B/01 | As above, black |
Stainless models with pierced rim (& gasket) | |
9/00448 | Hook-latch paddle, locking |
9/00448/01 | As 9/00448,FS880 standard keys |
9/00449 | Hook-latch paddle, non-locking |
9/00406 | Loop striker (stainless steel) |
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Case length | 140 mm |
B | Case width | 108 mm |
C | Hole centres | 95 mm |
D | Hole centres | 94 mm |
E | Max travel | 16 mm |
F | Hook penetration | 32 mm |
G | Hook engagement | 12 mm |
H | Hole sizes (dia) | 5 mm |
J | Maximum depth | 56 mm |
K | Recess length | 105 mm |
L | Recess width | 76 mm |
- As door closes, the ramped face of the hook meets striker and is forced laterally (E). Once closed the spring action secures hook under striker loop.
- This model normally has ‘deadbolt’ action. When key cylinder is locked, both flap and hook are held rigid. Paddles therefore will not slam in locked condition.
- Stainless models have pierced rim as shown, with moulded gasket. Mild steel models normally have plain rim (for welded-on mounting).
- ‘FS’ keys as standard with shuttered keyway. Optionally ‘FT’, ‘92’ or ‘DLP’, key types. Non-locking models available.
- Polished stainless steel or mild steel, clear zinc-plated. Optionally, black powder-coated finish.
- With stainless models, case & flap in Grade 304, all other components made in CR4, zinc plated. ‘Hook” is in stainless steel as standard.