9/00477 model with special 50mm ‘Extended Hook’
model with standard 32mm hook
9/00406 Striker (stainless)
Ordering Code
Mild steel models, blind-mounting (& gasket) | |
9/00462 | Hook-latch paddle, locking |
9/00462B | As above, black |
9/00462/01 | As 9/00462, FS880 standard keys |
9/00462B/01 | As above, black |
9/00463 | Hook-latch paddle, non-locking |
9/00463B | As above, black |
Stainless models, blind-mounting (& gasket) | |
9/00472 | Hook-latch paddle, locking |
9/00472/01 | As 9/00472, FS880 standard keys |
9/00473 | Hook-latch paddle, non-locking |
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
M | Total projection | 48 mm |
N | Hole centres | 20 mm |
O | Hole sizes | (dia) 7 mm |
P | Total width | 55 mm |
R | Total depth | 39 mm |
Striker made in 6mm diameter stainless rod, welded to stainless backplate. Alternatively it can be supplied without bend (M=80mm) as 9/00406/02.
- Blind-mounting, with four studs (M6 x 15mm) welded on inside rim. Consult engineering drawing for position of studs (not same as pierced holes).
- Alternative key types ('FT' double-sided keys), '92' series, etc. - Tool-operated plug (triangular, square-drive, etc) -Padlockable loop in flap.
- Black powder-coated, or other colours as specified.
- 'Non-'Deadbolt' locking; with this option the paddle will slam even when key cylinder is locked. This is not the normal mode of operation.
- Special 'Extended Hook', so that 'F' dimension = 50mm,for greater penetration below surface. Weathershield fitted to lock cylinder.