9/02300 - compression lock with straight latch bar, shown in fully-extended (‘open’) position.
Double -sided “FT” keys
Ordering Code
9/02300 | Compression lock, chrome |
9/02300/01 | as above, FT111 |
9/02300B/01 | as above, FT111 |
Alternative latch bars allow dimension D1 to be reduced to 14mm Click here for available options
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
A | Head Diameter | 29 mm |
B | Total Depth (locked) | 70 mm |
C | Head projection | 8 mm |
D1 | Depth to latch (min) | 44 mm |
D2 | Depth to latch (max) | 55 mm |
E | Body depth | 40 mm |
F | Engagement | 47.6 mm |
G | Body across flats (square) | 18.8 mm |
H | Body diameter | 22 mm |
I | “Take-up” Depth | 6 mm |
-
Very positive engagement,
water-resistant and adjustable. - Key brings latch bar into ‘closed’ position, then draws-up bar by 6mm against seal.
- Key turns clockwise through 90 degrees to operate latch, then through a further quarter-turn to compress against door-edge or striker. Latch bar is adjustable through 11mm.
- Fix through industry-standard 4-sided aperture with brass nut & stainless spring-washer on threaded body, and neoprene gasket. Latch-bar secured by nut and locknut on threaded spigot.
- ‘FT’ keys with shuttered keyway as standard.
- Chromium-plate as standard, optionally black powder-coated. Zinc alloy (body) & steel (latch bar).
- Alternative latch bars. Special key numbers.
- WBH design covered by UK Patent Application 0224237.8.