‘Medium’ & ‘Large’ Block Hinges (Two tapped holes in each block for mounting)
Ordering Code
| ‘Medium’ (76 mm) hinges (2 holes) | |
| 1/26750 | raw finish |
| 1/26915 | chrome finish |
| 1/26915B | black finish |
| ‘Large’ (100 mm) hinges (2 holes) | |
| 9/00838 | raw finish |
| 9/00839 | chrome finish |
| 9/00840 | black finish |
Door lifts onto frame
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| ‘Medium’ (76mm) | ‘Large’ (100mm) | ||
| A | Length (half) | 38 mm | 50 mm |
| B | Width | 17 mm | 19 mm |
| C | Height | 19 mm | 28 mm |
| D | Height to pin | 11 mm | 19 mm |
| E | Location | 19 mm | 25 mm |
| F | Location | 9 mm | 13 mm |
| G | Pin diameter | 6 mm | 8 mm |
| H | Hole size | M6 x 7.5 mm | M8 x 13 mm |
- Bottom half of hinge contains a fixed steel pin and is fitted to door frame. Top half is fitted to door edge and is lifted on (and off) pin. Movement is completely free.
- Chromium-plated, black powder-coated or raw metal for painting after assembly.
- Plant-on fitting, with two tapped holes in each half.
- Zinc diecast, with mild steel pin, zinc-plated on 76mm models. Stainless pin as standard on 100mm models.
