9/01824 - RH illustrated
9/01825 (LH)
9/01824 (RH)
Ordering Code
| 9/01824 | Concealed fix hinge, RH, black |
| 9/01825 | Concealed-fix hinge, LH, black |
Explanation of 'handing', two hinges should be fitted to each door
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| A | Length | 80 mm |
| B | Width (half) | 32.5 mm |
| C | Height to pin | 10.5 mm |
| D | Location to axis | 22.5 mm |
| E | Mounting centres | 60 mm |
| F | Stud dimensions | M8 x 15 mm |
| G | Height | 19.5 mm |
Pin diameter 8 mm, projecting 25 mm above face of lower hinge section.
Angle of opening - Hinges will open fully forward to 180°, backward to 90° from horizontal
- Doors lift-off fixed pin in bottom half of hinge. Use LH and RH together (opposed) when door is required to be permanently fixed.
- Fixing by two threaded studs M8 x 12 mm, cast-in each leaf.
- Black powder-coated finish.
- Zinc alloy diecast, with 8 mm stainless steel pin.
-
Stainless models
Axial loading
Maximum advised: 15.36kN
Ultimate: 23.04kN.
Radial loading
Maximum advised: 6.94kN
Ultimate: 10.41kN.
