9/01381 - LH illustrated
9/01381 (LH)
9/01380 (RH)
Ordering Code
| 9/01380 | Lift-off moulded hinge, RH |
| 9/01381 | Lift-off moulded hinge, LH |
Explanation of 'handing', two hinges should be fitted to each door
Specification
All dimensions shown are rounded to the nearest millimetre. Please request a drawing for the exact product specific and tolerances.
| A | Length | 74 mm |
| B | Width (half) | 30 mm |
| C | Height to pin | 12 mm |
| D | Location to axis | 18 mm |
| E | Hole centres | 51 mm |
| G | Height | 20 mm |
| H | Hole sizes (diameter) | 5 mm, c/s 9 mm |
Angle of opening - Hinges will open fully forward to 180°, backward to 45° from horizontal.
- Totally corrosion-resistant, for indoor/outdoor use, textured, self-colour finish, and self-lubricating - will not seize up or bind.
- Doors lift-off fixed pin in bottom half of hinge. Use LH and RH together (opposed) when door is required to be permanently fixed.
- Plant-on, and secured through countersunk holes in hinge leaf.
- Black, with matt textured finish.
- Hinges moulded in 15% glass-filled nylon, with 10 mm diameter pin in Grade 303 stainless steel, ultrasonically welded into lower half.
-
Moulded
Axial loading
Maximum advised: 2.63kN
Ultimate: 3.95kN.
Radial loading
Maximum advised: 0.76kN
Ultimate: 1.15kN.
